NAP
ACOUSTICS SOUTH EAST ASIA PTE LTD
DESIGNERS & MANUFACTURERS OF NOISE AND
VIBRATION CONTROL PRODUCTS
NAP Industrial Silencers
| SASE spark arrester silencer |
| See below for dimensions |
| Description NAP SASE silencers are multi-chamber reactive silencers, designed specifically for agricultural earthmoving or stationary equipment where control of particle filled exhaust gases is required. The spark arrester silencer includes carbon and ash traps which remove all sparks from the exhaust gas. |
| Application The SASE silencer is intended for use in outdoor areas where the potential fire risk of hot exhaust sparks cannot be tolerated. NAP spark arrester silencers are for use on engine driven compressors, mobile and stationary generating sets, two and four stroke petrol and diesel engines, in outdoor or remote installations. |
| Details The reactive multi-chambered design of the SASE silencer ensures reliable performance and long life under the most adverse conditions. The built-in spark arrester section prevents the spread of dangerous ash and carbon particles. The ash collector has drain plugs for easy removal of waste deposits. The silencer complies to AS 1019 - 1985 as does the Model SAST tractor silencer. |
Physical Dimensions
| Size (A) | Length (B) | Ø (C) | Offset (E) | Chamber (E) |
| 50 | 530 | 220 | 150 | 150 |
| 75 | 660 | 300 | 230 | 180 |
| 90 | 760 | 350 | 280 | 200 |
| 100 | 810 | 350 | 280 | 230 |
| 125 | 960 | 400 | 300 | 250 |
| 150 | 1060 | 450 | 360 | 280 |
| 200 | 1400 | 560 | 410 | 300 |
14 additional sizes are readily
available.
Dimensions in mm and weights in kg
Note :
1. Tolerance ±
3mm.
2. Inlet dimensions are nominal pipe sizes only.
3. Overall length of SASS silencers is less than the overall
length of SASE silencers.
4. Table D flanges are standard.
Acoustic Performance
| Insertion Loss, dB | ||||||||
| Inlet (mm) | 63 Hz | 125 Hz | 250 Hz | 500 Hz | 1 kHz | 2 kHz | 4 kHz | 8 kHz |
| 50 | 14 | 16 | 18 | 20 | 18 | 15 | 13 | 10 |
| 100 | 15 | 18 | 20 | 21 | 19 | 15 | 13 | 11 |
| 150 | 18 | 20 | 22 | 24 | 22 | 20 | 16 | 12 |
| 200 | 19 | 24 | 26 | 28 | 29 | 24 | 18 | 16 |
| 250 | 21 | 28 | 30 | 31 | 30 | 28 | 20 | 18 |
Use IL values for 250mm at larger inlet diameters.
Pressure Drop
![]() |
| Industrial Silencers | Other Products | Projects |
Copyright © 1999 NAP Acoustics South East Asia
Pte Ltd. All rights reserved.
Information in this document is subject to change without notice